Back to products
Original FLYSKY FS-CVT01 VOLTAGE COLLECTION MODULE Flysky Voltage Sensor Original price was: 1,400.00৳ .Current price is: 1,150.00৳ .

Radio Telemetry Module Wireless Wifi Telemetry Module For APM Pixhawk

Original price was: 3,600.00৳ .Current price is: 2,650.00৳ .

5 People watching this product now!
  • Pick up from the RadioGear Store

Schedule Pick up from store

Free

  • Inside Dhaka Metro

Inside Dhaka Metro city

24 Hours

60tk

  • Outside Dhaka metro

Outside Dhaka Metro

24 Hours

100tk

  • Outside Dhaka

All Bangladesh 

1-2 Days

130tk

  • Terms And Conditions
  • Return Policy

Payment Methods:

How to Order Online

Description

HOW to use WIFI Module for PIXHAWK?

 

1.How to connect?

use 6P line connects to pixhawk flight controller.

image-1.png
image-1.png

Due to the different firmware, some firmware, two ports can be used, some firmware can only use one of the ports. So find one of the available ports for the connection.

IF you use PX4 firmware ,only TELEM1 can be used ,can not use TELEM2.

For Ardupilot firmware , It is recommended to use the TELEM2 port. Or find one of the available ports for the connection.

For PX4 firmware , should use TELEM1 port.

2.How to use?

Please note:When using Wifi Radio Telemetry connection, it must use 3DR Power Module or 5V ESC to supply power to the flight control. USB cannot be inserted because USB priority is higher than Radio Telemetry . If USB cable is plugged in, it cannot be used for radio telemetry transmission.

image.png
image.png

The wifi hotspot name is Drone, so use telephone or computer connect to this hotspot, the password is 12345678.

Note:Some device(For example some iphone IOSsystem) cannot get ip automatically, you should set manual.

image-5.png

image-5.png

Set the Configure IP as Manual. Set IP address as “192.168.4.5” or other, but can not set as ” 192.168.4.1″,the last number cannot exceed 254.Set Subnet Mask as “255.255.255.0”(should set this value, cannot other). Set Router as “192.168.4.1”(should set this value, cannot other)

When your device connect to this hotspot successfully, you can use browser to vist http://192.168.4.1 , you can modify parameter.

image-6.png

image-6.png

H842257fdceb84a8cb86e111320c02189m.jpg
image-3.png

Note, the button is reset button ,not reboot button, when press the button , all the parameter will be set to default if you modify some parameter .

Power LED: when power up, the red LED is on.

Connect LED: when connect with ground control(For example, Mission Planner or Qgroundcontrol) successfully,the blue LED is flahing. when disconnect with ground control ,the blue LED is on.

1.How to use for Mission planner ?

Firstly, connect your PC to hotspot Drone successfully. Select UDP. Then click “Connect” button ,use 14550 port. Click “Ok”.There is no need to choose the baud rate. The default baud rate of the wifi module is 57600. But 115200 or other can also work.

image-1.png
image-1.pngimage-2.png

2.How to use for Telephone

For Android: Download qgroundcontrol (only for pixhawk,not for APM)

from here,http://qgroundcontrol.com/downloads/

Download DroidPlanner from here,https://github.com/DroidPlanner/Tower/releases

For iphone(IOS): Search qgroundcontrol on app store.

qgroundcontrol(only for pixhawk,not for APM) can connect automatically, DroidPlanner should choose “UDP” and “14550” port before connecting to groundcontrol.

 

HOW to use WIFI Module for APM?

use 5pin Line connect to APM flight controller.

image.png

HTB1n_lbg4WYBuNjy1zkq6xGGpXaI.jpg
( send it as your choice)
HTB1kLrUbQomBKNjSZFqq6xtqVXaA.jpg
Sc81f899663704bf7bd6391c04d8670ebG.jpg

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Radio Telemetry Module Wireless Wifi Telemetry Module For APM Pixhawk”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5