Ardupilot APM 2.8 Flight Controller Board with Protective Case Side Pin Original price was: 10,000.00৳ .Current price is: 6,999.00৳ .
Back to products

ArduPilot APM 2.8 Flight Controller + UBLOX NEO-8M GPS Combo

SKU: apm 2.8 + 8m gps

Original price was: 12,000.00৳ .Current price is: 10,900.00৳ .

15 People watching this product now!
  • Pick up from the RadioGear Store

Schedule Pick up from store

Free

  • Inside Dhaka Metro

Inside Dhaka Metro city

24 Hours

60tk

  • Outside Dhaka metro

Outside Dhaka Metro

24 Hours

100tk

  • Outside Dhaka

All Bangladesh 

1-2 Days

130tk

  • Terms And Conditions
  • Return Policy

Payment Methods:

How to Order Online

Description

Ardupilot APM 2.8 Flight Control Board Bend Pin with Protective Case

Specification:
Item Name: APM 2.8 Flight Control Board

Features:
Arduino Compatible!
Includes 3-axis gyro, accelerometer, along with a high-performance barometer
Onboard 4 MegaByte Dataflash chip for automatic datalogging
Optional off-board GPS, uBlox LEA-6H module with Compass.
One of the first open-source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

 

Description:
Receiver type: 72-channel u-Blox M8 engine
GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
SBAS L1 C/A: WAAS, EGNOS, MSAS
Galileo-ready E1B/C (NEO-M8N)
Nav. update rate1 Single GNSS: up to 18 HZ
Concurrent GNSS: up to 10 Hz
Position accuracy: 2 2.0 m CEP
Acquisition2 Cold starts: 26 s
Aided starts: 2 s
Reacquisition: 1.5 s
Sensitivity2 Tracking & Nav: –167 dBm
Cold starts: –148 dBm
Hot starts: –156 dBm
Assistance AssistNow GNSS Online
AssistNow GNSS Offline (up to 35 days)3
AssistNow Autonomous (up to 6 days)
OMA SUPL & 3GPP compliant
Oscillator TCXO (NEO-M8N/Q),
Crystal (NEO-M8M)
RTC crystal Built-In
Noise figure On-chip LNA (NEO-M8M). Extra LNA for lowest noise figure (NEO-M8N/Q)
Anti-jamming Active CW detection and removal. Extra onboard SAW bands pass filter (NEO-M8N/Q)
Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
Supported antennas Active and passive
Odometer Travelled distance
Data-logger For position, velocity, and time (NEO-M8N)
Operating temp. –40° C to 85° C
Storage temp. –40° C to 85° C (NEO-M8N/Q), –40° C to 105° C (NEO-M8M)
RoHS compliant (lead-free)
Qualification according to ISO 16750
Manufactured and fully tested in ISO/TS 16949 certified production sites
Uses u-Blox M8 chips qualified according to AEC-Q100
Supply voltage 1.65 V to 3.6 V (NEO-M8M), 2.7 V to 3.6 V (NEO-M8N/Q)
Power consumption4 23 mA @ 3.0 V (continuous),5 mA @ 3.0 V Power Save Mode(1 Hz, GPS mode only)
Backup Supply 1.4 to 3.6 V
Features:
Quick satellite searching, only need 10s to find 6 satellite in open space
Built-in compasses, refresh rate up to 10GHz
0.6 meters ultimate accuracy, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy
Support GPS+BD+SBAS, or GPS+GLONASS+SBAS
support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol etc.

Package Included:

1 x AMP2.8

1 x  M8 GPS WITH COMPASS

 

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “ArduPilot APM 2.8 Flight Controller + UBLOX NEO-8M GPS Combo”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5